Remote Support
Phone: 1-888-883-8383 | Dealer Login

Amplifiers

300 Watt Mixer / Amplifiers

AMP300
The Penton Audio AMP 300 was designed for use in permanent commercial sound installations. The AMP 300 is conservatively rated at 300-watts RMS into 25-volt, 70.7-volt, 4-ohm and/or 8- ohm loads.

Features include separate treble and bass controls, microphone, telephone and program input with built-in program-muting circuitry. Inputs and outputs are via dependable screw terminals, and RCA jacks.

It rests on four durable cushioned pads and is finished in black with easy-to-read, white-on-black knobs. Output protection consists of current limiting, transient suppression diodes and a fuse. The unit ships with a 16-guage CRS chassis with detachable power cord, 6' in length.
AMP300
  • 300-Watts
  • Microphone, Telephone, and Program Inputs
  • Use in 25/70.7-Volt and 4/8-Ohm Systems
  • Program Muting Circuitry
  • Separate Treble and Bass Tone Controls
AMP300
Power Output (RMS): 300 Watts
Distortion: Less Than 0.3% at Rated Output
Frequency Response: Program: 20-20kHz +/- 1 dB
Hum and Noise (Below -44 DBM): Program Input: -75 dB
Telephone Input: -75 dB
Microphone Input: -55 dB
Gain: Program Input: 55 dB
Telephone Input: 55 dB
Microphone Input: 107 dB
Muting: Microphones: Mic 1 VOX Priority over Aux 1 and Aux 2
Sensitivity Control: Aux 1 and Aux 2 and Microphone on Front Panel
Input and Output Connection: Aux 1 and Aux 2: RCA
Mic/Tel: Screw Terminal
Output: Screw Terminal
Mounts: Four Cushioned Pads (provided) or Rack-Mount using attached ears
Power Supply: 120 Volts
Supplied AC Outlet: One Grounded 120-Volt (300 Watts maximum)
Fuse Protection:
Adjustment Knobs: Plastic-Black Trimmed in White
Housing Material: Cold Rolled Steel
Finish: Black
Dimensions, Inch (MM): 19"W x 3.5"H x 11"D
Net Weight LBS (KGS): AMP300: 26 lbs
AMP300
The AMP 300 was designed with the accurate reproduction of voice announce, paging and background music in mind. It is ideally suited for applications such as restaurants, country clubs, halls, sports venues, factories, retail stores, warehouse, churches, transportation facilities and other public areas.

The program section receives stereo input from cassette recorders, CD players, TVs or broadcast transmission and reproduces it in monaural. An aux RCA jack is provided to accept post preamplifier sources.
Downloads

AMP300 Spec Sheet