The UAP G2 represents a significant step forward in audio processing. Stackable up-to 12 units inputs can be selected in blocks of four (0 in - 16 out, 4 in - 12 out, etc.). Inputs are mic or line level, with phantom power selectable individually. Moreover, the system is programmable via a single ethernet cable, but using a static IP address the G2 also can be diagnosed and controlled from any computer connected to the internet. Imagine the possibilities, diagnose system issues from your office prior to going out on a costly service call.
The free-form 'drag-and-drop' software offers all the power you need to create virtually any design. All standard DSP components are at your disposal - mixers, auto-mixers, compressors, limiters, parametric and graphic equalizers, delays of up to 2000ms, feedback suppressors, crossovers, filters, and much more. All in one of easiest-to-use software packages on the market today. We've worked hard to make the software powerful and flexible for the seasoned user, but not intimidating for those who have not yet discovered the power of drag-and-drop system design.
Built into the software package is a Monitor Window control screen for applications where you wish to use a PC to operate the system, but hide the actual 'wiring' from the end user. Your end user can now control the system from any computer in the building, or on the campus.
The UAP offers some features not found in any other DSP products on the market today. Most notable are the 8 assignable variable controls on the front panel. Each may be assigned to any DSP function in your design, and each is fully scalable. Or, use your own 10k pots and program up to 6 field remote controls per box of your own design. There is also a built-in TTL Logic control featuring 16 digital inputs and 8 fully programmable general purpose IO's for control of other equipment.
For remote control, we offer two systems - the RAC for an inexpensive way to simply select sources and adjust levels, and the URC, a much more sophisticated remote with LCD display and RS-485 control. For paging applications, we offer the PPM programmable paging microphone for total control of paging systems. Each microphone on the network also stores up to 5 minutes of messages for full "stacking paging" useful in airports and other high intensity paging applications.
With the software and hardware features of the UAP G2 at your disposal, you can't go wrong. Once you've designed a system with our processor, you'll know why the UAP G2 is the future!
- 16 Inputs or Outputs selectable in blocks of 4
- Digital Message Card with 20 minutes of 16 kHz audio with advanced scheduler
- 10 Design Presets and hundreds of subpresets
- All standard DSP components in the library
- 16 TTL logic inputs and 8 GPIO's for control of other systems
- 48 or 96 kHz audio processing using a 24 bit A/D and D/A converters with 32 bit SHARK 266 MHz chips
- RS-485 remote control (URC) and PPM paging mic available
- Noise Sensing Microphone Input
- Link up-to 12 units and share 12 channels of audio + data on the network
- Easy set-up RS-232 support for AMX, Crestron, or Windows XP PC
Audio input impedance: 10 kOhms (symmetrical, screw terminal)
Input sensitivity: 0 dB, -12dB, -24 dB,-40dB, -55 dB (software selection)
Max input: +15 dBu
Bandwidth: 20 Hz to 20 kHz
Phantom power soft config 48 VDC
Audio output impedance: 100 Ohms (symmetrical, screw terminal)
Bandwidth 20 Hz to 20 kHz
Max output +15 dBu.
Total Harmonic Distortion < 0.03% , +0 dBu, 20~20 kHz, unity gain, 20 kHz BW
S/N: (100 dB),( re+15 dBu), unity gain, 22 kHz BW
S/N:(80 dB),( re+15 dBu),( 54 dB gain), 22 kHz BW
Dynamic range: (100 dB),( re+15 dBu), 22 kHz BW
RS232 port: for ATEIS or third party equipment remote control
RS485 port: for Remote Controllers and Paging Microphones data control
RJ45 port: for PC control and system set up.
One RJ45 TX to send data and audio to next device
One RJ45 Rx to receive data and audio from the previous device
8 TTL output 0 to 5 VDC, Contact NO and NC
16 TTL inputs or analogue inputs: 0 to 5 VDC (software selection)
|Size and unit
Metal unit 1 U 19" grey RAL 7016
L x W x D: 431 x 44 x 240 mm
AC: 100 to 240 VAC 50/60 Hz
DC: 21-28 VDC
Consumption: 40 VA
10 VA in stand-by mode
Designed for Commercial applications, the UAPg2 is the new DSP audio matrix for medium paging and multizone audio routing applications. With its powerful audio digital signal processing, the UAPg2 can easily be used in a demanding environment requiring high audio quality. Using the Ethernet port, it is easy to connect and control the UAPg2 through an IP network or direct from a PC.