Remote Support
Phone: 1-888-883-8383 | Dealer Login

Horns / Sound Projectors

Indoor / Outdoor Cone Sound Projectors

CAD10T / CAD20T
Penton Audio models CAD20T and CAD10T are twin-cone, all-weather, full-range music projectors designed for long-term reliability and even coverage in constant-voltage, distributed audio systems.

The handsome, molded ABS housing is protected from elements with a UV inhibitor and sealed from the rear with a silicone rubber-like gasket, a gland nut and stainless steel hardware.

The CAD Series uses a 5-1/4" polypropylene cone that not only has moisture resistant qualities, but enhanced low frequencies as well.

Visually identical, they are finished in non-reflecting white with matching aluminum "U" brackets. (CAD20T-B is non-reflecting black.) Colors may be customized with epoxy paint.

CELL10T / CELL20T
Penton Audio CELL20T and CELL10T are attractive, but rugged sound/music projectors for use in constant-voltage systems requiring quality audio. Each has a 5-1/4" full-range twin-cone speaker. Units are rear sealed via a silicone rubber-like gaskets and gland nuts.

The CELL20T uses a polypropylene cone for use in outdoor environments, whereas the CELL10T uses a traditional paper cone for indoor applications. Both offer long-term reliability and even coverage.

Visually identical, both models have stainless steel hardware. They are finished in white with matching aluminum "U" brackets and aluminum grilles. Housings can be painted using epoxy paint.

CELL10BDT / CELL20BDT
The CELL10BDT and CELL20BDT from Penton Audio are rugged bidirectional sound projectors having two 5-1/4" full-range twin-cone speakers, one at either end of the rugged extruded aluminum housing. These models offer long-term reliability and even coverage for distributed audio, including transformer and stainless steel hardware.

Both use twin-cones for good sound dispersion. The CELL20BDT uses coated paper cones treated to withstand moisture, whereas the CELL10BDT cones are traditional paper for indoor applications.

Visually identical, they are white and equipped with stainless steel hardware. Both have matching aluminum grilles and slide-on mounting brackets. Units may be refinished with epoxy paint.
CAD10T / CAD20T
  • Frequency Response Tailored for Music or Speech
  • Weather-Sealed ABS Housing with Molded-in UV Inhibitor
  • Polypropylene Twin-Cone for Excellent Dispersion
  • Stainless Steel Hardware
CELL10T / CELL20T
  • Frequency Response Tailored for Music or Speech
  • Sealed, Rugged Extruded Aluminum Housing
  • Twin-Cone Speaker for Excellent Dispersion
  • Stainless Steel Hardware
CELL10BDT / CELL20BDT
  • Frequency Response Tailored for Music or Speech
  • Rugged, Sealed, Extruded-Aluminum Housing
  • Two 5" Twin-cone Speakers for Excellent Dispersion
  • Hidden Set-screw Mounting
CAD10T / CAD20T
CONE SPEAKER SIZE: 5-1/4" (134 mm)
FREQUENCY RESPONSE: CAD20T: 160-20,000 Hz +/- 6 dB
CAD10T: 180-20,000 Hz +/- 6 dB
LOW FREQUENCY -3dB DOWN POINT: CAD20T: 165 Hz
CAD10T: 190 Hz
POWER HANDLING CAD20T: 28 Watts
CAD10T: 15 Watts
SPL @ 1w 1m: CAD20T: 92 dB
CAD10T: 93 dB
SPL @ Full Power, 1m: CAD20T: 105 dB
CAD10T: 103 dB
Dispersion @ 2 kHz (6dB Down): 110 degrees
Directivity Q Factor @ 2 kHz: 5.5
Cone Design: Twin Cone
Cone Material Polypropylene
Magnet Weight: CAD20T: 10 oz
CAD10T: 5.34 oz
CONNECTION: CAD20T-B: Terminal Block
CAD20T: Via Wire Nuts or Terminals
CAD10T: Via Wire Nuts or Terminals
TRANSFORMER MAX INSERTION LOSS: 0.6 dB
70.7-VOLT TRANSFORMER TAPS (WATTS) CAD20T:
Red 20
Blue 10
Orange 5
Yellow 2.5
Black Common

CAD10T:
Red 10
Blue 5
Orange 2.5
Yellow 1.25
Black Common
70.7-VOLT TRANSFORMER IMPEDANCE CAD20T:
Red 250 Blue 500
Orange 1 K
Yellow 2 K

CAD10T:
Red 500
Blue 1 K
Orange 2 K
Yellow 4 K
SUPPLIED MOUNTING ACCESSORIES: Stainless Steel Bracket Bolts
HOUSING MATERIAL: Molded ABS with UV Inhibitors
MOUNTING: Non-reflective White "U" Bracket
APPROVALS: CE
FINISH: CAD20T: Non-reflective White
CAD20T-B: Non-reflective Black
CAD10T: Non-reflective White
Dimensions, Inch (MM) W/O Bracket: 5.52 x 8.62 (w/gland nut) (138 x 219)
Net Weight LBS(KGS): CAD20T: 4.18 (1.90)
CAD10T: 3.42 (1.55)


CELL10T / CELL20T
Cone Speaker Size: 5-1/4" (134 mm)
Frequency Response: CELL20T: 160-18,000 Hz +/- 5 dB
CELL10T: 180-20,000 Hz +/- 6 dB
-3dB Down Point: CELL20T: 165 Hz
CELL10T: 190 Hz
Power Handling: CELL20T: 28 Watts
CELL10T: 15 Watts
SPL @ 1w 1m: CELL20T: 92 dB
CELL10T: 93 dB
SPL @ Full Power, 1m: CELL20T: 105 dB
CELL10T: 105 dB
Dispersion @ 2 kHz (6dB Down): 110 degrees
Directivity Q Factor @ 2 kHz: 5.5
Cone Design: Twin Cone
Cone Material CELL20T: Polypropylene
CELL10T: Paper Cone
Magnet Weight: CELL20T: 10 oz
CELL10T: 5.34 oz
Transformer Max Insertion Loss: 0.6 dB
Transformer Tap Change: Via Color-coded Wire
70.7-Volt Transformat Taps (Watts): CELL20T:
Red 20
Blue 10
Orange 5
Yellow 2.5
Black Common

CELL10T:
Red 10
Blue 5
Orange 2.5
Yellow 1.25
Black Common
70.7-Volt Transformer Impedance: CELL20T:
Red 250
Blue 500
Orange 1 K
Yellow 2 K

CELL10T:
Red 500
Blue 1 K
Orange 2 K
Yellow 4 K
Approvals: CE
Housing Material: Extruded Aluminum
Finish: Baked-on White Epoxy Paint
Mounting: Non-reflective White "U" Bracket
Supplied Mounting Accessories: Stainless Steel Bracket Bolts
Dimensions, Inch (MM) W/O Bracket: 5.91 x 8.27 (w/gland nut) (150 x 210)
Net Weight LBS(KGS): CELL20T: 5.29 (2.40)
CELL10T: 4.41 (2.00)


CELL10BDT / CELL20BDT
CONE SPEAKERS & SIZE: Two 5-1/4" (134 mm)
FREQUENCY RESPONSE: CELL10BDT: 170-19,000 Hz +/- 6 dB
CELL20BDT: 190-17,000 Hz +/- 6 dB
POWER HANDLING: CELL10BDT: 30 Watts
CELL20BDT: 56 Watts
SPL @ 1W 1M CELL10BDT: 95 dB
CELL20BDT: 94 dB
SPL @ FULL POWER, 1M CELL10BDT: 105 dB
CELL20BDT: 107 dB
DISPERSION @ 2 KHZ (6 dB DOWN): 110 degrees x 110 degrees bi-directional
DIRECTIVITY Q FACTOR @2 kHz: 2.2
CONE DESIGN: Twin Cone
CONE MATERIAL: CELL10BDT: Paper Cone
CELL20BDT: Coated Paper
MAGNET WEIGHT: CELL10BDT: 5.34 oz
CELL20BDT: 10 oz
TRANSFORMER MAX INSERTION LOSS: 0.7 dB
TRANSFORMER TAP CHANGE: Via Color Coded Wire
CONNECTION: Via Wire Nuts
TRANSFORMER: CELL10BDT: 70.7/25 volts
CELL20BDT: 70.7/25 volts
70.7-VOLT TRANSFORMER TAPS: CELL10BDT: 20, 10, 5, 2.5
CELL20BDT: 40, 20, 10, 5
70.7-VOLT TRANSFORMER IMPEDANCE: CELL10BDT: 250, 500, 1K, 2K
CELL20BDT: 125, 250, 500, 1K
25-VOLT TRANSFORMER TAPS: CELL10BDT: 20, 10, 5, 2.5
CELL20BDT: 40, 20, 10, 5
25-VOLT TRANSFORMER IMPEDANCE: CELL10BDT: 31.25, 62.5, 125, 250
CELL20BDT: 15.6, 31.25, 62.5, 125
SUPPLIED MOUNTING ACCESSORIES: Stainless Steel Bracket Bolts
HOUSING MATERIAL: Extruded Aluminum
MOUNTING: Slide-on Bracket
FINISH: Baked-on White Epoxy Paint
APPROVALS: CE
DIMENSIONS, INCH (MM): 7.72 x 5.51 (196 x 140)
BRACKET MOUNTING DIMENSIONS ON CENTER, INCH (MM): 2.362 (60)
NET WEIGHT LBS (KGS) CELL10BDT: 5.29 (2.40)
CELL20BDT: 6.83 (3.10)
CAD10T / CAD20T
Versatile in application, the CAD series may be used for surface applications indoors or out and for value-engineered projects without sacrificing audio quality. The durability of the molded ABS housing is well suited for moist outdoor environments, but its European styling makes it a great choice for an indoor track lighting decor.

Mainly considered for music installations, the CAD Series is equally effective for voice reproduction in commercial, industrial, and institutional settings.

Applications include mounting in atriums, malls, banks, upscale stores and outdoor restaurants. Additionally, they can be used for traditional paging situations where the customer demands quality background music.

CELL10T / CELL20T
The fashionable European-styled CELL Series projects a strong precision-like appearance, while having a frequency response ideal for background music or voice communication.

The CELL10T is designed to be mounted indoors in malls, restaurants, sporting venues, parking facilities, transportation terminals, food centers and hotel/motel applications.

The treated-paper twin cones of the CELL20T are ideal for outdoor situations to best take advantage of its sealed housing and stainless steel hardware. It handily reproduces music or traditional paging in commercial facilities like shopping centers, country clubs, park districts restaurants as well as in industrial, institutional and military installations.

CELL10BDT / CELL20BDT
Designed for use in the London Underground corridors these sturdy, but remarkably good-looking bi-directional speakers have a high output level with an exceptional intelligibility factor.

The CELL20BDT is ideally suited for outdoor installations such as transportation facilities, parking garages and military complexes. The CELL10BDT is designed for indoor applications such as schools, hotel/motels, office hallways and other traditional long passageways.

The slide-on bracket may be mounted onto a single-gang, e.o. box cover, or directly onto a wall. Unit then slides on and is secured with a recessed set hex screw.